GE LOGIQ E9 Service Manual page 482

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-7-3 Bottom Filter installation (looped type strap)
8-7-3-1 Removal Process with Looped Strap
1.) Locate the looped strap on the right hand side of the LOGIQ E9, which can be viewed through the
right rear wheel well.
2.) Insert the first and second fingers of your right hand through the filter removal loop.
3.) Using the first and second fingers of the your hand, lever down on the filter removal loop and the
fingers of the right hand.
NOTE: This action will prevent your fingers from being struck by the filter when you remove it and it
pops loose.
8 - 118
5
EV
Figure 8-47 Bottom Filter Looped Strap (located in wheel well)
Figure 8-48 Placement of Fingers in Looped Strap
Section 8-7 - Main Console parts replacement
LOGIQ E9 Service Manual