GE LOGIQ E9 Service Manual page 229

GE H
EALTHCARE
D 5180263-100, R
IRECTION
6-2-3 Access to Adjustments
The monitor adjustment is done via three controls (buttons) on front of the monitor.
The LCD settings have been optimized at the factory, so normally, there should be no need for any
further adjustments.
Under special light conditions, you may want to adjust the LCD screen's backlight intensity.
Factory default Intensity is: 100%.
Figure 6-1 LCD adjustment buttons - see
For complete information, refer to the latest revision of the LOGIQ E9 Basic User Manual, Chapter 16
for R3.x.x.
To obtain different test patterns for B/W or color adjustments, press Utility in the Touch Panel and select
Test Patterns.
5
EV
feature descriptions
Chapter 6 Service Adjustments
Table 6-2 "Advanced LCD Adjustments" on page 6-5
LOGIQ E9 Service Manual
for
6 - 3