GE LOGIQ E9 Service Manual page 384

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-4-6-12 Restoring Patient Archive and System Configurations
For complete instructions, refer to the latest revision of the LOGIQ E9 Basic User Manual, Chapter 16.
1.) From the Touch Panel, select Utility -> System -> Backup/Restore.
2.) On the Restore screen, select as needed:
-
-
-
-
3.) Select the appropriate Source Device.
The Restore procedure will OVERWRITE the existing data on the local harddrive. Make sure to select
CAUTION
the correct source device.
4.) If restore is done from a backup on a removable media, insert the media in the drive.
5.) Select Restore Now.
Depending on the selection, one or two Restore confirmation windows are displayed:
6.) Ensure that the correct source is selected, and select OK.
The selected items are copied to the systems. If items from the System Configuration are restored
the system needs to be rebooted. The Reboot system window is displayed.
7.) Select OK to reboot the system, and verify the Customer Presets are working properly.
8-4-6-13 Verifying the Video and DVR settings
1.) Select Utility -> System -> Peripherals.
2.) Verify Video Settings Format as recorded in
on page
Correct the selection if needed.
3.) Verify DVR model as recorded in
Correct the selection if needed.
4.) Format a DVD, and backup Customer Presets to confirm proper DVD/DVR write functionality.
8 - 20
5
EV
Patient archive to restore the patient archive images.
Report archive
System configuration to restore all System Settings/User Defined Configuration (Presets), OR
One or several system configuration items to restore parts of the System Settings and User
Defined Configuration (Presets), see:
4-31.
Section 8-4 - Loading / Reloading / Upgrading the Software
Figure 4-21 "Backup/Restore settings" on page
Table 4-14 "Record settings from Peripheral screen"
Table 4-14 "Record settings from Peripheral screen" on page
LOGIQ E9 Service Manual
4-30.
4-31.