GE LOGIQ E9 Service Manual page 475

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-6-13 Probe Cable Hooks replacement
8-6-13-1 Manpower
One person, 15 minutes.
8-6-13-2 Tools
For tools needed, refer to:
8-6-13-3 Probe Cable Hook removal
1.) Unscrew the fastening screw.
The screw may be locked with Lock-Tite, so you may need to apply a little extra force.
2.) Remove the Cable Hook.
8-6-13-4 Probe Cable Hook installation
1.) Position the Probe Cable Hook (Figure 8-46).
2.) Fix it in place by using an M5x20 screw with an M6 washer. Lock-Tite has to be used.
Torque: 50 Ncm (0.37 lbf-ft or 4.4 lbf-in) (fingertight).
5
EV
8-2-5 "Tools needed for servicing LOGIQ E9" on page
Figure 8-46 Screw placement, Probe Cable Hook
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
8-5.
8 - 111