GE LOGIQ E9 Service Manual page 487

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Section 8-8
Casters and Brakes replacement
8-8-1 Rear Casters replacement
8-8-1-1 Manpower
Two people, 15 minutes.
8-8-1-2 Tools
For tools needed, refer to:
NOTE:
8-8-1-3 Preparations
When preparing for the replacement, you must perform the following steps:
1.) Power down the system
2.) Disconnect the mains power cable from the wall outlet.
3.) Disconnect all Probes and External I/O Cabling.
4.) Remove both Side Covers.
5.) Remove the Rear Bumper.
6.) Remove the Rear Cover.
Follow these links if you need more information:
• 4-2-4 "Power shut down" on page 4-7.
• 8-5-2-4 "Side Covers removal" on page 8-28.
• 8-5-9 "Rear Bumper replacement" on page 8-44.
• 8-5-7 "Rear Cover replacement" on page 8-38.
5
EV
8-2-5 "Tools needed for servicing LOGIQ E9" on page
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
8-5.
8 - 123