GE LOGIQ E9 Service Manual page 146

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-4-12 Network "Sniffer"
The includes a network sniffer, Wireshark, that displays network traffic between the
and other devices. Its output can be saved in files. It is useful for debugging connectivity issues. Usually
only DICOM traffic is . Follow these steps:
Table 3-29
1.
2.
3.
3 - 74
5
EV
Network "Sniffer"
Press Alt-N to display Wireshark.
In Capture/Interfaces press Options on the interface that corresponds to the IP address.
Make sure "Capture packets in promiscuous mode" is unchecked. Press Start.
Section 3-9 - Connectivity Setup and Tips
Wireshark: Capture Interfaces
Wireshark: Capture Options
(continued on next page)
LOGIQ E9 Service Manual