GE LOGIQ E9 Service Manual page 552

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-10-4-4-2 4D MC Replacement for Cherokee/Mitra PS
NOTE: Discard any removed components in the appropriate manner.
Table 8-94
1. Locate the 4D Motor Controller on the
back of the Main PS.
Remove the five screws (circled) securing
the 4D MC Cover to the Main PS.
Slide cover off to access the
4D MC.
2. Disconnect the USB Cable (1) and the
Flex Cable (2) from the PS. DO NOT pull
from the ribbon to remove. Only pull from
the connector.
Remove two screws (circled) and slide the
board away to remove the 4D Motor
Controller.
NOTE: The replacement 4D MC includes
a new Flex Cable, two USB Cables and a
P-clamp.
8 - 188
5
EV
4D MC Removal for Cherokee/Mitra PS
Steps
Section 8-10 - Main Power Supply parts replacement
LOGIQ E9 Service Manual
Corresponding Graphic
4D MC Cover removed