GE LOGIQ E9 Service Manual page 126

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-4-4 How to Setup and Use a DICOM Print Service
A DICOM printer is different from a typical network printer. It understands and accepts image files in
DICOM format, and extracts and prints the images within.
Print Service Setup
To setup a Print Service on your , follow these steps:
Table 3-16
1.
2.
3.
4.
5.
6.
7.
3 - 54
5
EV
Print Service Setup
In Utility -> Connectivity -> Service, from the Destination Device drop-down menu, select the
device on which the service resides. (This assumes you have already setup the device in the
Device tab.)
From the Select Service drop-down menu, select DICOM Print and press Add.
Change the name of the service to one of your choosing.
Enter the AE Title and Port Number of the service. AE Title is case-sensitive.
From the Vendor drop-down menu, select the vendor of the service printer. The system adjusts
some of the Properties of the printer accordingly.
Maximum Retries, Retry Interval and Timeout have the same use as with DICOM Image
Storage Services. See:
Set the Properties of the printer as desired. Refer to the operator manual of the printer for
preferred or expected settings. The graphic in this Table shows typical settings.
Section 3-9 - Connectivity Setup and Tips
3-9-4-2 "Properties" on page
(continued on next page)
LOGIQ E9 Service Manual
3-44.