GE LOGIQ E9 Service Manual page 111

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-2 Devices, Services, Dataflows and Print Buttons
Figure 3-21 Dataflows
Services
Print Service
Transfer of
Images and
Data
A device is a physical unit, separate from the LOGIQ E9, where images and data can be stored and shared. A
device provides various services to the LOGIQ E9.
To represent the device on the LOGIQ E9, add it in Utility
To represent the services of the device(s) on the LOGIQ E9, add them in
->
Utility
Set up Dataflows and Print Buttons to direct images and data to the services.
Use Utility
A dataflow stores images in the clipboard to the local Hard Disk Drive. When the exam ends, the dataflow sends
the images to the services assigned to it. (A Direct Store setting on the dataflow changes this behavior.
See: 1.) "Dataflow" on page
A print button sends an image to the services assigned to it whenever pressed. A print button also stores the image
locally (to the "clipboard") if "Copy to Dataflow" is assigned to it.
Send To (in the Exam View tab) sends an existing exam's images and other data to one service at a time.
See: 3.) "Send To" on page
Worklist and Query/Retrieve services transfer data to the LOGIQ E9. See:
Worklist Service" on page 3-57
page 3-68.
Keep in mind that the settings of a print button that stores an image on the LOGIQ E9 determine the format of the
image file stored locally. A service's settings dictate the format of the file that is sent to the service.
5
EV
Device
Storage
Image Storage
Commitment
Service
Service
Send To:
->
Connectivity Service.
-> ->
Connectivity Dataflow and Utility
3-48.)
3-48.)
and
Chapter 3 LOGIQ E9 Setup
PACS Server,
Printer, etc.
Worklist Service
Print Button
->
Connectivity
->
Connectivity
3-9-4-9 "How to Setup and Use a DICOM Query/Retrieve (Q/R) Service" on
LOGIQ E9 Service Manual
Performed
Procedure
Service
LOGIQ E9
Dataflow
Local Archive
->
Device.
->
Button.
3-9-4-5 "How to Setup and Use a DICOM
Query /
Retrieve
Service
3 - 39