GE LOGIQ E9 Service Manual page 87

Hide thumbs Also See for LOGIQ E9:

5180263-100, R

Back Cover Label and ETL testing laboratories safety rating label (ETL may not be present)

Figure 3-6 Rating Plate Label - R4.x.x

EMI protection

This unit has been designed to minimize the effects of Electro-Magnetic Interference (EMI). Many of the

covers, shields, and screws are provided primarily to protect the LOGIQ E9 from image artifacts caused

by this interference. For this reason, it is imperative that all covers and hardware are installed and

secured before the unit is put into operation.

2-2-4 "EMI limitations" on page 2-5

Chapter 3 LOGIQ E9 Setup

for more information about EMI protection.

LOGIQ E9 Service Manual