GE LOGIQ E9 Service Manual page 136

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-4-7 How to Setup and Use a DICOM Storage Commitment Service
DICOM Storage Commitment enables the to obtain a commitment from the image storage service that
images have been stored. With this commitment, you may choose to delete the images from the .
To set up Storage Commitment on the , follow these steps:
Table 3-22
1.
2.
3.
4.
5.
6.
3 - 64
5
EV
DICOM Storage Commitment Service Setup and Use
In Utility -> Connectivity -> Service, from the Destination Device drop-down menu, select
your Image Storage server.
From the drop-down menu of services, select Dicom Storage Commitment and press Add.
Provide a name, set the AE Title and Port Number for your Image Storage service.
Maximum Retries, Retry Interval and Timeout have the same use as with DICOM Image
Storage Services. See:
For Associated Storage, select the name of your Image Storage service.
Save your changes and press Verify. A Smiley Face indicates successful communication with
the service.
Section 3-9 - Connectivity Setup and Tips
3-9-4-2 "Properties" on page
(continued on next page)
LOGIQ E9 Service Manual
3-44.