GE LOGIQ E9 Service Manual page 584

Hide thumbs Also See for LOGIQ E9:

5180263-100, R

On-Board V Nav Stand Option Contents, location and placement of parts

1. V Nav Arm Stand Post

2. Cover Plate

3. Socket Head Cap Screw (SHCS) - (x4) for

4. V Nav Arm Stand to LOGIQ E9 Mounting Plate

5. Socket Head Cap Screw (SHCS) - (x6) to

mount Stand Post to Mounting Plate

6. Screws - (x3) to mount the Mounting Plate

7a. V NAV Stand Post Stand-off Fastener to

Targa - long/top - (x1)

7b. V NAV Stand Post Stand-off Fastener to

Targa - medium/center - (x1)

7c. V NAV Stand Post Stand-off Fastener to

Targa - short/bottom - (x1)

8. LOGIQ E9 Targa (not part of the kit)

9. access hole to Item 5 (in stand post)

10. Cover Plate groove (in stand post) - Cover

Plate not shown

11. Tension/Sliding Mechanism (in stand)

NOTE: Before Item 7b can be installed, the

Grounding Plug installed MUST BE removed.

Section 8-12 - V Nav Roll Stand and/or On-Board Stand Installation and/or Replacement

Table 8-109 Reference for assembling Option to LOGIQ E9

Option Contents

LOGIQ E9 Service Manual

Corresponding Graphic

Illustration shown without the rear cover