GE LOGIQ E9 Service Manual page 402

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-5-7 Rear Cover replacement
NOTE: If the V Nav On-Board Stand Option is present on the LOGIQ E9, the Option must be removed
to remove the Rear Cover. See:
8-12-3 "Parts Reference - On-board V Nav Stand" on page
8-5-7-1 Manpower
One person, 15 minutes.
8-5-7-2 Tools
For tools needed, refer to:
8-5-7-3 Preparations
When preparing for the replacement, you must perform the following steps:
1.) Power down the system
2.) Disconnect the mains power cable from the wall outlet.
3.) Disconnect all Probes and External I/O Cabling.
4.) Remove the Rear Bumper.
5.) Remove both Side Covers.
6.) Remove Filter Cover at rear.
7.) Remove Filter.
Follow these links if you need more information:
• 4-2-4 "Power shut down" on page 4-7.
• 8-5-2 "Side Covers replacement" on page 8-27.
• 8-5-6 "Filter Cover replacement" on page 8-37.
• 8-7-2 "Rear Filter and "handle type" Bottom Filter replacement / cleaning" on page 8-114.
8 - 38
5
EV
8-2-5 "Tools needed for servicing LOGIQ E9" on page
Section 8-5 - Replacing Covers and Bumpers
LOGIQ E9 Service Manual
8-217.
8-5.