GE LOGIQ E9 Service Manual page 282

GE H
EALTHCARE
D 5180263-100, R
IRECTION
7-5-11 Encoders Tab
Test the encoder functionality by rotating each encoder knob. See: Figure 7-36. Verify that the position
is updated as the encoder is moved.
Test the encoder button selection function by pressing each knob on the op panel. Verify that the
corresponding knob is highlighted when each knob is pressed. See: Figure 7-36.
7 - 38
5
EV
Figure 7-36 Encoders Tab
Section 7-5 - Common Service Desktop
LOGIQ E9 Service Manual