GE LOGIQ E9 Service Manual page 558

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Table 8-97
Route the USB Cable through the slot
3.
in the PS.
Firmly, but gently push on the 4D MC
Cover until it is seated in place
(connected) to the PS.
Make sure the USB Cable is still in the
correct position.
Reinstall the three 4D MC Cover
screws.
4. Put the Main PS into position so it will
be ready to be mounted.
Route the USB cable between the
Targa frame and the BEP.
8 - 194
5
EV
4D MC Reinstallation for Lambda PS
Steps
Section 8-10 - Main Power Supply parts replacement
LOGIQ E9 Service Manual
Corresponding Graphic