GE LOGIQ E9 Service Manual page 548

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Table 8-92
3.
If a tie wrap is not attached, attach a
second tie wrap. Position the tie wrap 3 to
5 cm (1.19 to 1.96 inches) from the end of
the cable sleeves. Trim the end of the tie
wrap.
4.
Position the wire tied cables between the
heatsink (a) and the module (b) before
placing the Fan Assembly into the PS.
8 - 184
5
EV
Installing the replacement Fan Assembly
Step
Section 8-10 - Main Power Supply parts replacement
LOGIQ E9 Service Manual
Corresponding Graphic