1.6.4
Check on GX Developer
■1. Check if the PLC CPU recognizes the GOT (For bus connection) (QCPU (Q mode) only)
Using the [System monitor] of GX Developer, check if the PLC CPU recognizes the GOT or not.
For the GX Developer operation method, refer to the following manual.
➠
GX Developer Version
(1) Check the Module Name, I/O Address and Implementation Position. (The display example is
based on GX Developer Version 8)
Startup procedure: GX Developer
Operating Manual
[Diagnostics]
[System monitor]
Not displayed
No error displayed
at all times
1.6 Checking for Normal Monitoring
1
1 - 49