Check On Gx Developer - Mitsubishi Electric GT1685 Connection Manual

1.6.4

Check on GX Developer


Check if the PLC CPU recognizes the GOT (For bus connection) (QCPU (Q mode) only)
Using the [System monitor] of GX Developer, check if the PLC CPU recognizes the GOT or not.
For the GX Developer operation method, refer to the following manual.
GX Developer Version
(1) Check the Module Name, I/O Address and Implementation Position. (The display example is based on GX
Developer Version 8)
Startup procedure
GX Developer
Not displayed
Operating Manual
[Diagnostics] [System monitor]
No error displayed
at all times
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
1
2
3
4
5
6
7
8
1 - 51