Mitsubishi Electric GOT2000 Series Connection Manual page 332

(3) Routing parameter setting
Up to 64 [Transfer Network No.]s can be set.
However, the same transfer network number cannot be set twice or more (multiple times).
Therefore, the one that can access to other station from the request source host GOT is 64 kinds of [Transfer
Network No.]s.
Target network No.
Relay network No.
Relay station No.
(4) Communication confirmation
The INIT. LED on the Ethernet module turns on when the module is ready to communicate.
For confirming the communication state, refer to the following.
➠
*1
5 - 66
5.4 PLC Side Setting
Item
POINT POINT POINT
Routing parameter setting of request source
Routing parameter setting is also necessary for the request source GOT.
For the setting, refer to the following.
➠
5.3.5 Routing parameter setting
■4. Confirming the communication state of Ethernet module
QJ71E71-100
The LEDs layout of QJ71E71-100.
1 to 239
1 to239
0 to 64
RUN ERR.
INIT. COM.ERR.
OPEN 100M
SD RD
Range
*1