■3. Ethernet Adapter Module setting
Set the parameter with the Ethernet adapter module setting tool.
For details of the setting method, refer to the following manual.
➠
CC-Link IE Field Network Ethernet Adapter Module User's Manual
(1) CC-Link IE Field Network setting
Network No.
Station No.
*1
Set the same value as the network No. set on the PLC side.
*2
Set a value other than the network No. set on the PLC side.
(2) Ethernet setting
IP address
*1
Set the IP address within the following range.
Item
Item
192.168. 3. 30
Set the fourth octet within the range from 1 to 64.
Set the third octet within the range from 1 to 239.
Set value
*1
1
*2
1
Set value
*1
192.168.3.30
5.4 PLC Side Setting
5
5 - 97