Mitsubishi Electric GOT2000 Series Connection Manual page 815

Device SP121 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
b15 b7 b0
Write 1 to the bit of device SP121 that corresponds to the Reset command (WS11).
In this example, device SP121 must store 0800H.
Convert 0800H to a decimal value (2048), and then write 2048 to device SP121.
When using a WS device, [Alternate] of a bit switch cannot be used.
Use [Momentary], [Set], and [Reset] for bit switch actions.
The following shows correspondences between virtual inverter devices used in the GOT and data of the inverter.
14
14 - 59
14.4 Device Range that Can Be Set