Mitsubishi Electric GOT2000 Series Connection Manual page 940

Item
Retry
Timeout Time
Delay Time
Servo axis switching GD
device head No.
*1 For details, refer to the following manual.
➠
17 - 10
17.4 GOT Side Settings
Set the number of retries to be performed when a communication
timeout occurs.
When receiving no response after retries, the communication times
out. (Default: 3times)
Set the time period for a communication to time out. (Default: 3sec)
Set the delay time for reducing the load of the network/destination
PLC. (Default: 0ms)
Set the servo axis switching GD device head No.
(Default: 10)
Q corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
POINT POINT POINT
When MELSECNET/H communication unit is used
When connecting to the MELSECNET/10 network using the MELSECNET/H communication
unit,
specify [MNET/10 mode] as [Network Type].
Description Range
0 to 5times
1 to 90sec
0 to 300ms
<For GT27, GT25, GT23>
0 to 65520
<For GT21, GS>
0 to 2032