4) [Module Parameter]-[Basic Settings]
Set [Module Parameter] of the CC-Link IE field network module (RJ71GF11-T2(LR)).
[Network Topology]
Set [Network Topology] to [Ring].
[Network Configuration Settings]
Set [Network Configuration Settings] as follows.
5) [Module Parameter]-[Application Settings]
Set [Module Parameter] of the CC-Link IE field network module (RJ71GF11-T2(LR)).
At [Redundant System Settings], set [Module Operation Mode] of standby system (system B) to [Online].
4.1 MELSEC iQ-R Series
4
4 - 35