Mitsubishi Electric GOT2000 Series Connection Manual page 953

(b) Example of GX Developer setting
For details of the parameter setting, refer to the following.
➠
C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373
POINT POINT POINT
IP address setting
IP address setting on GX Developer is invalid.
Set the IP address by the 7-segment LED and rotary switch of the CNC side, referring to the next
page.
(2) CNC side parameter setting
Confirm the CNC side parameter setting with the settings of IP address, gateway address, subnet mask and port No.
by the 7-segment LED and rotary switch of the CNC side.
For details of the parameter setting operation, refer to the following.
➠
C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373 IV Setting the Ethernet IP
Address
7-segment LED
Rotary switch
17.5 CNC Side Settings
17
17 - 23