Mitsubishi Electric GOT2000 Series Connection Manual page 324

■1. System configuration
(When the PLC side [MELSOFT Connection Extended Setting] is the default value)
*1
(1) [PLC parameter] of GX Works2
(a) Built-in Ethernet port
IP address
Subnet mask pattern
Default router IP address
Communication data code
Enable online change (FTP, MC protocol)
Disable direct connection to MELSOFT
Do not respond to search for CPU (Built-in Ethernet
port) on network
5 - 58
5.4 PLC Side Setting
These setting items do not exist at the PLC side. However, the virtual values must be set on the GOT side.
➠
(2) [Controller Setting] and [Ethernet] of GT Designer3
Item
<GOT>
(The settings other than the
following are set to the default)
Network No.
PLC No.
IP address
Port No.
Communication
format
<Connecting to Built-in
1
Ethernet port CPU>
(The settings other than the
following are set to the default)
Network No. : 1 (virtual)
PLC No. : 2 (virtual)
IP address : 192.168.3.1
: UDP
Communication
format
<Connecting to Built-in Ethernet port CPU>
2
(The settings other than the following are
set to the default)
Network No. : 1 (virtual) *1
PLC No. : 3 (virtual)
*1
IP address : 192.168.3.2
Communication : UDP
format
192.168.3.1
(Use default value)
: 1
: 1
: 192.168.3.18
: 5001
: UDP(fixed)
*1
*1
Set value
-
-
Setting necessity at
GOT connection