Mitsubishi Electric GOT2000 Series Connection Manual page 366

■2. Basic setting of MT Works2
Use the default values of the basic setting for the system configuration above.
(1) Built-in Ethernet port
IP address
Subnet mask pattern
Default router IP address
Communication data code
Enable online change
(MC protocol)
Open settings
(2) Open settings
The setting is required for all the connected GOTs.
Protocol
Open system
5 - 100
5.4 PLC Side Setting
Item
Item
Set value
192.168.3.39
(Default)
-
-
(Use default value)
Refer to (2)
: Necessary : As necessary
Set value
UDP (fixed)
MELSOFT connection (fixed)
Setting necessity at GOT
connection
: Not necessary