Mitsubishi Electric GOT2000 Series Connection Manual page 158

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

(3) When connecting to AnACPU/AnNCPU

• The GOT can monitor the control station on the network.

When the PLC CPU on the control station is the QCPU (Q mode) or QnACPU, the GOT cannot monitor devices

other than B and W assigned for the network parameter.

• The GOT cannot monitor normal stations on the network.

• The GOT cannot monitor any stations on the other networks.

■2. Direct CPU connection/serial communication connection

(1) When connecting to multiple CPU system

• Corresponding to the access range described in ■1. Bus connection (1).

(2) When connecting to RCPU

• For the serial communication connection, refer to the following.

• The GOT cannot access a CPU via MELSECNET (II), computer link, or CC-Link network.

(3) When connecting to QCPU (Q mode)/QnACPU

• Corresponding to the access range described in ■1. Bus connection (2).

(4) When connecting to QCPU (A mode)/AnUCPU

• The GOT can monitor the control station and all the normal stations on the network.

For monitoring devices (other than B and W assigned for the network parameter) of other stations, the GOT cannot

monitor the devices of the PLC CPU that is the QCPU (Q mode) or QnACPU.

• If connected to a relay station, use data link parameter [Effective unit number for accessing other stations] to

designate the unit number that is connected to the network to be monitored.

(5) When connecting to AnACPU/AnNCPU

• Corresponding to the access range described in ■1. Bus connection (3).

3.1 Access Range for Monitoring Stations on Network Systems

MELSECNET/H connection, MELSECNET/10 connection, CC-Link IE Controller Network

connection, CC-Link IE Field Network connection

Show Quick Links

Chapters

Table of Contents