Mitsubishi Electric GOT2000 Series Connection Manual page 161

■7. Monitor accessible range of other stations and setting method of monitor devices
Example 1: When using bus connection
• Monitor accessible range of devices (other than B or W) of other stations or other networks
Specify the accessing network No. or station as shown in the following table.
(1) To monitor B or W of the connected station (host station) assigned with a network parameter,
specify the host station.
(2) To monitor another station (other than B or W) or another network, specify the station (network
No. and station No.).
Station connected to GOT
AnU (1-1)
QnA (1-2)
AnA (1-3)
AnU (1-4) (2-2)
QnA (2-1)
AnN (2-3)
AnU (2-4)
Control station
AnU
(1-1)
QnA
Network No.1
(1-2)
AnA
(1-3)
Network No.1
AnU (1-1) QnA (1-2)
Host ──
Other (1-1) Host
Other (0-0) ──
Other (1-1) ──
Other (1-1) Other (1-2)
── ──
Other (1-1) ──
POINT POINT POINT
Monitoring link device B or W
For monitoring devices B and W that are allocated by the link parameter, use the host device
number even when designating devices allocated to another station.
Otherwise, the display speed will be reduced.
3.1 Access Range for Monitoring Stations on Network Systems
Control station
QnA
(2-1)
AnU
(1-4)
Network No.2
(2-2)
AnN
(2-3)
Station to be accessed
AnA (1-3) AnU (1-4) QnA (2-1)
Other (1-3) Other (1-4) ──
── Other (1-4) Other (2-1)
Host ── ──
── Host ──
── Other (1-4) Host
── ── ──
── Other (1-4) ──
How to read the table
Upper line:
Lower line:
AnU
(2-4)
Network No.2
AnU (2-2) AnN (2-3) AnU (2-4)
Other (2-2) ── Other (2-4)
Other (2-2) ── Other (2-4)
── ── ──
Host ── Other (2-4)
Other (2-2) Other (2-3) Other (2-4)
── Host ──
Other (2-2) ── Host
Accessibility
: Accessible
: Not accessible
Network settings
Host
Other (Network No. - Station number)
3
3 - 7