Mitsubishi Electric GOT2000 Series Connection Manual page 411

■11. When connecting to FX3UC (FX3UC-
connection)
PLC
Function
Model name
*3
adapter
FX3UC- /D
FX3U-232ADP
FX3U-232ADP-
FX3UC- /DS
MB
FX3UC- /DSS
*1 For details of the GOT multi-drop connection, refer to the following.
➠
*2 A GOT and a peripheral such as a PC with GX Developer installed can be connected to the function adapter and the FXCPU
individually.
*3 When using function expansion boards or function adapters, confirm the communication settings.
➠
*4 When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.
*5 GT25-W, GT2505-V does not support the option device.
Connection cable
Communication Cable model
type Connection diagram number
GT01-C30R2-9S(3m)
RS-232 connection
diagram 1)
RS-232
RS-232 connection
diagram 4)
19. GOT MULTI-DROP CONNECTION
6.6 Precautions ■1. Connection to FXCPU (2)When connecting with function extension board or communication special
adapter
/D, FX3UC- /DS, FX3UC-
Max.
Option device
distance
- (Built into GOT)
GT15-RS2-9P
or
15m
GT10-C02H-
6PT9P
GT01-RS4-M
15m - (Built into GOT)
6.2 System Configuration
/DSS) (RS-232
GOT
Number of
connectable
*5
Model
equipment
1 GOT for 1
function adapter
*4
*1
-
*2
6
6 - 37