System Configuration - Mitsubishi Electric GOT2000 Series Connection Manual

10.2 System Configuration

10.2.1 Connecting to optical loop system
RCPU CC-Link IE controller
QCPU network module
PLC
CC-Link IE controller
*5
Model name
communication
MELSEC iQ-R Series
Motion controller CPU
(MELSEC iQ-R Series)
C Controller module RJ71GP21-SX
(MELSEC iQ-R Series)
CNC C80
CR800-R(R16RTCPU)
MELSEC-Q
Motion controller CPU
(Q Series)
QJ71GP21-SX
C Controller module
QJ71GP21S-SX
(Q Series)
MELSEC-QS
CNC C80
*1 When the CC-Link IE Controller Network is in the extended mode, use a unit with the upper five digits of the serial No. 12052 or
later.
For the system configuration on the CC-Link IE Controller Network module side, refer to the following manual.
➠
*2 For the optical fiber cable, refer to the following manual.
➠
*3 The overall extension cable length and the length between stations vary depending on the cable type to be used and the total
number of stations.
For details, refer to the following manual.
➠
*4 When Universal model QCPUs is a control station, up to 119 GOTs can be connected.
When a QCPU other than Universal model QCPU is the control station, the number of connectable GOTs is 63 units (at most).
Basic model QCPU and the QSCPU cannot be used as the control station.
*5 When the CC-Link IE Controller Network is in the extended mode, only MELSEC-Q series Universal model QCPU can be used.
*6 When the CC-Link IE Controller Network is in the extended mode, use a module with the serial No. 02910908******* or later.
*7 GT25-W, GT2505-V does not support the option device.
Connection cable
network
Communication
type
*1
unit
CC-Link IE
CC-Link IE Controller Network Reference Manual
CC-Link IE Controller Network Reference Manual
CC-Link IE Controller Network Reference Manual
GOT
Connection cable
Max.
Cable model
distance
Optical fiber cable
*3
GT15-J71GP23-SX
*2
10.2 System Configuration
Communication driver
CC-Link IE Controller Network
GOT
connectable
*7
Model
Option device
*6
119 GOTs
Number of
equipment
*4
10
10 - 9