15.4 GOT Side Settings
15.4.1
When directly connecting the GOT to a servo amplifier
■1. Setting communication interface (Controller Setting)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: MITSUBISHI ELECTRIC
• Controller Type: Set according to the Controller Type to be connected.
• I/F: Interface to be used
• Driver: MELSERVO-J4, J3, J2S/M, JE
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠ ■2.
Click the [OK] button when settings are completed.
2.
[Controller Setting] from the menu.
Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
3.
4.
Click!
15.4 GOT Side Settings
15
15 - 19