Mitsubishi Electric GOT2000 Series Connection Manual page 553

■3. Parameter setting (when connecting to MELSEC-Q or QS series)
(1) [Network parameter] of GX Developer
(a) Network parameter
Network type
*1
Starting I/O No.
*2
Network No.
Total stations
Group No.
Mode
Network range assignment
Refresh parameters
Interrupt settings
Control station return setting
Redundant settings
Interlink transmission parameters
Routing parameters
*1 When using Q170MCPU, set it according to the system configuration.
*2 Specify the same network No. as that of the GOT.
*3 Set it when the MELSECNET/H network module is used in the redundant QnPRHCPU system.
Item
*3
9.5 PLC side setting when connecting to MELSEC/10
Set value
MNET/10 mode (Control station) (fixed)
0000H
1
2
0 (fixed)
Online (fixed)
Refer to (b)
(Use default value)
Refer to (c)
: Necessary : As necessary
Setting necessity at GOT
connection
9
: Not necessary
9 - 29