7.2.2
Connecting to QCPU (Q mode)
QCPU
(Q mode)
PLC
Serial
communication
Model name
*1
module
QJ71C24
QJ71C24N
QJ71C24-R2
QJ71C24N-R2
QJ71CMO
QJ71CMON
MELSEC-Q
(Q mode)
QJ71C24
QJ71C24N
QJ71C24N-R4
*1
*2
*3
*4
*5
7 - 10
7.2 System Configuration
Serial
communication
module
Communication
type
GT09-C30R2-9P(3m)
RS-232
GT09-C30R4-6C(3m)
GT09-C100R4-6C(10m)
GT09-C200R4-6C(20m)
GT09-C300R4-6C(30m)
RS-422
For details on the system configuration on the serial communication module side, refer to the following manual.
➠
Q Corresponding Serial Communication Module User's Manual (Basic)
For details on the system configuration on the modem interface module side, refer to the following manual.
➠
Modem Interface Module User's Manual
Two GOTs can be connected with the function version B or later of the serial communication module.
For details of the GOT multi-drop connection, refer to the following.
➠
19. GOT MULTI-DROP CONNECTION
When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.
GT25-W, GT2505-V does not support the option device.
Connection cable
Connection cable
Max.
Cable model
distance
or
15m
RS-232 connection
diagram 1)
RS-232 connection
15m
diagram 3)
1200m
or
RS-422 connection
diagram 1)
500m
RS-422 connection
1200m
diagram 2)
Communication driver
GOT
GOT
*5
Model
Option device
- (Built into GOT)
GT15-RS2-9P
GT10-C02H-
*4
6PT9P
*3
-
GT01-RS4-M
- (Built into GOT)
- (Built into GOT)
GT15-RS4-9S
GT10-C02H-9SC
*3
-
GT01-RS4-M
- (Built into GOT)
Serial (MELSEC)
Number of
connectable
equipment
2 GOTs for 1 serial
communication
*2
module
1 GOT for 1 modem
interface module