Ethernet Setting - Mitsubishi Electric GOT2000 Series Connection Manual

5.3.4

Ethernet setting

Item
Host
*5
Net No.
*4*5*6
Station
*1
Unit Type
IP Address
*2*3
Port No.
*2
Communication
*1 Select one of the following [Controller Type].
• Built-in Ethernet port (hereafter CPU): RCPU, RnMTCPU, RnNCCPU, CR800
• C Controller module (MELSEC iQ-R series): RnCCPU
• Built-in Ethernet port (MELSEC iQ-F series): FX5CPU
• Connection to Built-in Ethernet port: QnUD(P)V/QnUDEH, QCPU, Q170MCPU, Q170MSCPU(-S1), Q173D(S)CPU/
Q172D(S)CPU: QnUD(V/EH)
• C Controller module (Q series): QnD(H)CCPU
• Connection to Built-in Ethernet port LCPU: LCPU
• Ethernet module (NZ2GF-ETB): NZ2GF-ETB
• Q17nNCCPU: Q17nNC
• Ethernet module (MELSEC iQ-R Series): RJ71EN71
• The RnENCPU varies in choice of Unit Type by a port name.
Port CPU P1: RCPU
Port P1: RJ71EN71
Port P2: Not applicable to the Ethernet connection.
• Ethernet module (Q, L Series): QJ71E71/LJ71E71
• Ethernet module (QnA Series): AJ71QE71
• Ethernet module (A Series): AJ71QE71
• Ethernet module (FX Series): FX
• Built-in Ethernet port FXCPU: FX
For the applicable Ethernet module, refer to the following.
➠
5.2 System Configuration
Description
The host is displayed.
(The host is indicated with an asterisk (*).))
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
Set the type of the connected Ethernet module.
(Default: QJ71E71/LJ71E71)
Set the IP address of the connected Ethernet module.
(Default: blank)
Set the port No. of the connected Ethernet module.
(Default: 5001)
UDP
Range
-
1 to 239
1 to 64 or 1 to120
RCPU,
RnCCPU,
RnNCCPU,
CR800,
FX5CPU,
QnUD(P)V/QnUDEH,
QnD(H)CCPU,
LCPU,
Q17nNC, RJ71EN71, QJ71E71/LJ71E71,
AJ71QE71,
AJ71E71,
FX,
NZ2GF-ETB
0.0.0.0 to 255.255.255.255
1024 to 65534
UDP, TCP
5.3 GOT Side Settings
5
5 - 23