Mitsubishi Electric GOT2000 Series Connection Manual page 461

■2. AJ71QC24, MELDAS C6*
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Delay Time
(b) GOT communication settings
(2) To maintain the communication settings of the serial communication module which is
connected to F900, set the communication setting of the GOT as follows.
The value of Transmission Speed remains 38400bps.
Format
2
Set this item when change the transmission speed used for communication with
the connected equipment. (Default: 19200bps)
Set this item when change the data length used for communication with the
connected equipment.
(Default: 8bit)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is performed during
communication.
(Default: Odd)
Set the number of retries to be performed when a communication timeout occurs.
When receiving no response after retries, the communication times out.
(Default: 0time)
Set the time period for a communication to time out. (Default: 3sec)
Set this item to adjust the transmission timing of the communication request from
the GOT. (Default: 0ms)
Format
1
Description
7.4 GOT Side Settings
Transmission Speed
38400bps
Range
4800bps, 9600bps,
19200bps, 38400bps,
57600bps, 115200bps
8bit (fixed)
1bit (fixed)
Odd (fixed)
0 to 5times
1 to 30sec
0 to 300 (ms)
7 - 29
7