Connecting To Melsecnet/10 Network Module (Qna Series) - Mitsubishi Electric GOT2000 Series Connection Manual

9.5.2

Connecting to MELSECNET/10 network module (QnA Series)

This section describes the settings of the GOT and MELSECNET/10 network module (QnA series) in the following case of
system configuration.
In this section, the network parameter (common parameter) of GX Developer is taken as an example to provide
explanations.
■1. System configuration
*1
9 - 36
9.5 PLC side setting when connecting to MELSEC/10
POINT POINT POINT
MELSECNET/10 network module (QnA Series)
For details of the MELSECNET/10 network module (QnA Series), refer to the following manual.
➠
For QnA/Q4AR MELSECNET/10 Network System Reference Manual
MELSECNET/10 (PLC to PLC network)
The MELSECNET/10 network module is mounted at slot 0 of the base unit.
The start I/O No. of the MELSECNET/10 network module is set at "0".
<GOT>
(Use the default value for settings other
than the following.)
<MELSECNET/10 network module> *1
(Use the default value for settings other than the following.)
: 1
Station No.
: Online
Mode
: MNET/10 (Control station)
Network type
: 1
Network No.
: 2
Total stations
Network range assignment: B0000 to B00FF
H
W0000 to W00FF
H
: 2
: Online
: 1
W0100 to W01FF
H H
H
H