Laser Displacement Sensor Mh11 Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

18.5 Laser Displacement Sensor MH11 Side Settings

18.5.1 Connecting to the Laser Displacement Sensor MH11
■1. Communication settings
Communication settings are not required, since the following contents are fixed.
Communication speed
Data Bit
Parity bit
Stop bit
18.6 Device Range that Can Be Set
The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
■2. Device range
Bit device
Word device
18 - 6
18.5 Laser Displacement Sensor MH11 Side Settings
Setting item
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Device name
Internal relay (R)
Data (DT)
Internal relay (WR)
POINT POINT POINT
Device setting for Internal relay (R)
Set word address (decimal number) + bit address (hexadecimal number).
115200bps (fixed)
8bit (fixed)
None (fixed)
1bit (fixed)
Description
Setting range
R0000 to R999F
DT0 to DT99999
WR000 to WR999
Device number
Bit address (hexadecimal number)
Word address (decimal number)
Controller Side Settings
Device No. representation
Decimal number
+
Hexadecimal number
Decimal number
Decimal number