Mitsubishi Electric GOT2000 Series Connection Manual page 469

(2) When connecting to the CH2 side
Switch
No.
Position
Switch 3
b8 to b15
Switch 4
Switch 5
*1 The module operates under the following transmission specifications.
Operation setting
Data bit
Parity bit
Even/odd parity
Stop bit
Sum check code
*2 The serial communication module operates at the transmission speed set on the GOT.
*3 When the value of switch setting is other than "0", the setting of [Format] and [Transmission Speed] on the GOT side are required
to be changed.
➠
7.4.2 Communication detail settings
Bit
Specified value
b0 OFF
b1 OFF
b2 OFF
CH2
b3 OFF
transmission
*1
settings
b4 OFF
b5 OFF
b6 OFF
b7 OFF
―
CH2 transmission speed setting
― CH2 Communication protocol setting
― Station number setting
Transmission specifications
Description
Operation setting
Data bit
Parity
bit
Even/odd parity
(Operates according to
the GOT side
Stop bit
specifications.)
Sum check code
Write during RUN
Setting modifica-tions
*2
GX Developer
connection
0th station
Setting details
Independent
8bits
Yes
Odd
1bit
Yes
7.5 PLC Side Setting
*3
Set value
7
0000H
0000H
0000H
7 - 37