Mitsubishi Electric GOT2000 Series Connection Manual page 336

(c) Detail settings
IP address
Subnet mask
Default gateway
IP address settings CH2
(d) System settings
Points occupied by empty slot
Remote reset
Output mode at STOP to RUN
Intelligent function module settings
Initial settings of intelligent function module
WDT (Watchdog timer) setting
Error check
Operation mode at the time of error
Module synchronization
Built-in Ethernet port open settings
Event history registration settings
5 - 70
5.4 PLC Side Setting
Item
Item
Set value
192.168.3.1
255.255.255.0
-
-
: Necessary : As necessary
Set value
(Use default value)
Mark the checkbox
(Use default value)
: Necessary : As necessary
Setting necessity at
GOT connection
: Not necessary
Setting necessity at GOT
connection
: Not necessary