1.4.3
Terminating resistors of GOT
The following shows the terminating resistor specifications on the GOT side.
When setting the terminating resistor in each connection type, refer to the following.
■1. RS-422/485 communication unit
Set the terminating resistor using the terminating resistor setting switch.
Terminating resistor
*1
• For RS422/485 communication unit
1 - 32
1.4 Connection Cables for the Respective Connection
*1
100 OHM
Disable
The default setting is "Disable".
Terminating resistor setting switch
Rear view of RS-422/485 communication unit.
Switch No.
1
ON
OFF
SW1
ON
2
ON
OFF