System Configuration For Connecting To Nj Series - Mitsubishi Electric GOT2000 Series Connection Manual

4.3.2

System Configuration for connecting to NJ series

Ethernet
NJ series
module
PLC
Ethernet
Series
*3
module
CJ1W-EIP21
NJ501-1500
NJ501-1400
NJ501-1300
NJ501-1520
NJ501-1420
NJ501-1320
NJ501-1340
NJ301-1200
NJ301-1100
NJ101-1000
NJ101-9000
NJ101-1020
NJ101-9020
-
*1
*2
*3
*4
*5
4 - 50
4.3 Ethernet Connection
Connection cable
Connection cable
Cable model
Shielded twisted pair cable (STP):
*1
Category 5 and 5e
The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
Product manufactured by OMRON Corporation. For details of the product, contact OMRON Corporation.
If it is connected to devices other than the GOT using the connection, the number of connectable GOTs decreases.
For details, refer to the OMRON PLC user's manual.
GT25-W, GT2505-V does not support the option device.
GOT
GOT
Maximum
segment
*5
Option device
*2
length
- (Built into GOT)
100m
GT25-J71E71-100
100m - (Built into GOT)
100m GT25-J71E71-100
Communication driver
EtherNet/IP (OMRON NJ), Gateway
Number of connectable
equipment
Model
When PLC:GOT is N:1
The following shows the
number of PLCs for 1 GOT
127 or less
When PLC:GOT is 1:N
The following shows the
number of GOTs for 1 PLC
<Connection: CLASS3>
*4
128 or less
<Connection: UCMM>
*4
32 or less
When PLC:GOT is N:1
The following shows the
number of PLCs for 1 GOT
127 or less
When PLC:GOT is 1:N
The following shows the
number of GOTs for 1 PLC
<Connection: CLASS3>
*4
32 or less
<Connection: UCMM>
*4
32 or less