Dlp-B256 View Ethernet Statistics Pm Parameters - Cisco ONS 15327 Procedure Manual

NTP-B198 Monitor Ethernet Performance

DLP-B256 View Ethernet Statistics PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click an E-Series or G-Series Ethernet card. The card view appears.
Step 1
Click the Performance tab.
Step 2
Step 3 Click the Statistics subtab
Figure 7-6
Card View
Performance
Statistics
Auto-refresh
Click the Refresh button. Performance monitoring statistics for each port on the card appear.
Step 4
The PM parameter names appear on the left portion of the window in the Param column. The parameter
numbers appear on the right portion of the window in the Port # columns. For PM parameter definitions
refer to the Cisco ONS 15327 Reference Manual.
View the Port # columns to see the current PM statistics for each port.
Step 5
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15327 Procedure Guide, R4.0
7-16
(Figure
Statistics Window on the Card View Performance Tab
Refresh
Baseline
This task enables you to view current statistical PM counts on a selected
E-Series or G-Series Ethernet card and port to detect possible
performance problems.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
7-6).
Chapter 7 Monitor Performance
March 2003