Table 6-2 Color Codes For Alarms And Conditions; Table 6-3 Release 4.0 Port-Based Alarm Numbering Scheme Comparison - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Chapter 6
Manage Alarms
Table 6-1
Column
Cond
Description
Num
Ref
Table 6-2
Table 6-2
Color
Red
Orange
Yellow
Magenta (pink) Raised Not-Alarmed (NA) condition
Blue
White
Software Release 4.0 has specifically numbered STS and VT alarm object identifiers based upon the
object TL1 access identifiers (AIDs). The R40 numbering scheme is compared in
numbering scheme in previous releases.
Table 6-3
Previous Release STS and VT Alarm Numbering
MON
object
TERM
object
1. In Release 4.0 STSTerm and VtTerm alarms, the Object and Port columns apply to the paired MON object within the upstream
card. In these alarms, STSMon and STSTerm, or VTMon or VtTerm alarm objects are identical.
If alarms are present, refer to the Cisco ONS 15327 Troubleshooting Guide for information and
Step 3
troubleshooting procedures.
Complete the
Step 4
task on page
Stop. You have completed this procedure.
November 2004
Alarm Column Descriptions (continued)
Information Recorded
The error message/alarm name; these names are alphabetically defined in the "Alarm
Troubleshooting" chapter of the Cisco ONS 15327 Troubleshooting Guide
Description of the alarm
A count of incrementing alarm messages
The reference number assigned to the alarm
lists the color codes for alarm and condition severities.
Color Codes for Alarms and Conditions
Description
Raised Critical (CR) alarm
Raised Major (MJ) alarm
Raised Minor (MN) alarm
Raised Not-Reported (NR) condition
Cleared (C) alarm or condition
Release 4.0 Port-Based Alarm Numbering Scheme Comparison
STS (or VT)-6-6
(Slot-STS or VT within card)
STS-2-3
(Local slot-STS or VT within
local terminating card)
"DLP-B110 View Alarm History" task on page
6-10, or the
"DLP-B114 View Conditions" task on page 6-11
NTP-B196 View Alarms, History, Events, and Conditions
Release 4.0 STS and VT Alarm Numbering
Port=1 MON
STS (or VT)-6-1-6
object
(Slot-Port-STS or VT within
port)
Port=3 TERM
STS-6-1-6
object
(Upstream Slot-Port-STS or VT
within port)
6-8, the
"DLP-B113 Synchronize Alarms"
Cisco ONS 15327 Procedure Guide, R4.0
Table 6-3
to the
1
Port=1
Port=1
as needed.
6-7
Advertisement
Table of Contents
