Cisco ONS 15327 Procedure Manual page 89

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 2
Connect the PC and Log into the GUI
DLP-B50 Set Up a Windows PC for Craft Connection to an ONS 15327 on the
Same Subnet Using Static IP Addresses
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Verify the operating system that is installed on your computer:
Step 1
a.
b.
c.
If you have Windows 95 or 98 installed on your PC, complete the following steps:
Step 2
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
March 2003
This task sets up your computer for a local craft connection to the ONS
15327 when:
None
NTP-B21 Set Up Computer for CTC, page 2-1
As needed
Onsite
None
From the Windows Start menu, choose Settings > Control Panel.
In the Control Panel window, double-click the System icon.
In the General tab of the System Settings window, verify that the Windows operating system is one
of the following: Windows 95, Windows 98, Windows 2000, Windows NT 4.0, or Windows XP.
From the Windows Start menu, choose Settings > Control Panel.
In the Control Panel dialog box, click the Network icon.
In the Network dialog box, select TCP/IP for your PC Ethernet card, then click Properties.
In the TCP/IP Properties dialog box, click the DNS Configuration tab and choose Disable DNS.
Click the WINS Configuration tab and choose Disable WINS Resolution.
Click the IP Address tab.
In the IP Address window, click Specify an IP address.
In the IP Address field, enter an IP address.
In the Subnet Mask field, type the same subnet mask as the ONS 15327. The default is
255.255.255.0 (24 bit).
Click OK.
In the TCP/IP dialog box, click the Gateway tab.
In the New Gateway field, type the ONS 15327 IP address. Click Add.
Verify that the IP address appears in the Installed Gateways field, then click OK.
When the prompt to restart your PC appears, click Yes.
NTP-B22 Set Up CTC Computer to Connect to the ONS 15327
You will access nodes running software releases before Release 3.3.
You will connect to one ONS 15327; if you will connect to multiple
ONS 15327s, you might need to reconfigure your computer's IP
settings each time you connect to an ONS 15327.
You need to use non-ONS 15327 applications such as ping and trace
route.
Cisco ONS 15327 Procedure Guide, R4.0
2-11

Advertisement

Table of Contents
loading

Table of Contents