Dlp-B163 Delete Snmp Trap Destinations; Dlp-B164 Delete Ethernet Rmon Alarm Thresholds - Cisco ONS 15327 Procedure Manual

Chapter 9 Change Node Settings

DLP-B163 Delete SNMP Trap Destinations

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Provisioning > SNMP tabs.
Under Trap Destinations, click the trap you want to delete.
Step 2
Click Delete. A confirmation dialog box appears.
Step 3
Click Yes. Confirm that the changes appear; if not, repeat the task.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-B164 Delete Ethernet RMON Alarm Thresholds

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Ether Bridge > Thresholds tabs.
Step 1
Click the RMON alarm threshold you want to delete.
Step 2
Click Delete. The Delete Threshold dialog box opens.
Step 3
Click Yes to delete that threshold.
Step 4
Return to your originating procedure (NTP).
Step 5
March 2003
Use this task to delete SNMP trap destinations on an ONS 15327.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
This task deletes remote monitoring (RMON) threshold crossing alarms
for Ethernet ports.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
NTP-B87 Change SNMP Settings
Cisco ONS 15327 Procedure Guide, R4.0
9-25