Dlp-B129 Reset Current Pm Counts; Dlp-B130 Clear Selected Pm Counts - Cisco ONS 15327 Procedure Manual

Chapter 7 Monitor Performance
Return to your originating procedure (NTP).
Step 7

DLP-B129 Reset Current PM Counts

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click an XTC card (for electrical PM counts), Ethernet card, or OC-N card. The
card view appears.
Step 2 Click the Performance tab.
Click Baseline.
Step 3
Note
View the current statistics column(s) to observe changes to PM counts for the current time interval.
Step 4
Step 5 Return to your originating procedure (NTP).

DLP-B130 Clear Selected PM Counts

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Pressing the Clear button can mask problems if used incorrectly. This button is commonly used for
Caution
testing purposes.
March 2003
This task uses the Baseline button to clear the PM count displayed in the
current time interval, but it does not clear the cumulative PM count. This
task allows you to see how quickly PM counts rise.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
The Baseline button clears the PM counts displayed in the current time interval, but does not
clear the PM counts on the card. When the current time interval expires or the window view
changes, the total number of PM counts on the card and in the window appear in the appropriate
column. The baseline values are discarded if you change views to a different window and then
return to the Performance Monitoring window.
This task uses the Clear button to clear specified PM counts depending
on the option selected.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
NTP-B195 Monitor Electrical or Optical Performance
Cisco ONS 15327 Procedure Guide, R4.0
7-11