Cisco ONS 15327 Procedure Manual page 365

Chapter 10 Change Port Settings
Table 10-9 OC-N SONET Thresholds Options (continued)
Parameter
SEFS
FC
UAS
PPJC-PDET
NPJC-PDET
PPJC-PGEN
NPJC-PGEN
PSC
PSD
PSC-W
PSD-W
March 2003
NTP-B89 Modify Line Settings and PM Parameter Thresholds for Optical Ports
Description
Severely errored framing seconds
Failure count
Unavailable seconds
Positive Pointer Justification Count, STS
Path detected.
Negative Pointer Justification Count, STS
Path detected.
Positive Pointer Justification Count, STS
Path generated.
Negative Pointer Justification Count, STS
Path generated.
Protection Switching Count (Line)
Protection Switch Duration (Line)
Protection Switching Count - Working line
BLSR is not supported on the OC-3 card;
therefore, the PSC-W, PSC-S, and PSC-R
PMs do not increment.
Protection Switching Duration - Working
line
BLSR is not supported on the OC-3 card;
therefore, the PSD-W, PSD-S, and PSD-R
PMs do not increment.
Options
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line. Select the
bullet and click the Refresh button. or Path
(Near and Far End)
Numeric. Can be set for 15-minute or
one-day intervals for Line or Path (Near
and Far End). Select the bullet and click
the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click the
Refresh button.
Cisco ONS 15327 Procedure Guide, R4.0
10-13