Ethernet Connections; Required Tools And Equipment For Installation And Maintenance - Cisco Catalyst 8300 Series Hardware Installation Manual

Ethernet Connections

Ethernet Connections
The IEEE has established the Ethernet IEEE 802.3 Standards. The devices support the following Ethernet
implementations:
• 1000BASE-T—1000 Mb/s full-duplex transmission over a Category 5 or better unshielded twisted-pair
• 100BASE-T—100 Mb/s full-duplex transmission over a Category 5 or better unshielded twisted-pair
• 10BASE-T—10 Mb/s full-duplex transmission over a Category 5 or better unshielded twisted-pair (UTP)

Required Tools and Equipment for Installation and Maintenance

Warning
Warning
Warning
Warning
You need the following tools and equipment to install and upgrade the router and its components:
• ESD-preventive cord and wrist strap
• Number 2 Phillips screwdriver
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
26
(UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).
(UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).
cable. Supports the Ethernet maximum length of 328 feet (100 meters).
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Instructed and Skilled Person Definitions
Instructed person is someone who has been instructed and trained by a skilled person and takes the
necessary precautions when working with equipment. Skilled person/Qualified personnelis someone
who have training or experience in the equipment technology and understand potential hazards when
working with equipment. Statement 1089
Instructed and Skilled Person Definitions
Instructed person is someone who has been instructed and trained by a skilled person and takes the
necessary precautions when working with equipment. Skilled person/Qualified personnelis someone
who have training or experience in the equipment technology and understand potential hazards when
working with equipment. Statement 1090
Instructed and Skilled Person Definitions
Instructed person is someone who has been instructed and trained by a skilled person and takes the
necessary precautions when working with equipment. Skilled person/Qualified personnelis someone
who have training or experience in the equipment technology and understand potential hazards when
working with equipment. Statement 1091
Prepare for Installation