Figure 6-11 Card View Electrical Port Alarm Profile - Cisco ONS 15327 Procedure Manual

Chapter 6 Manage Alarms

Figure 6-11 Card View Electrical Port Alarm Profile

Repeat
Step 7
To apply profiles to all optical or electrical ports on a card:
Step 8
a. Choose a new profile from the Force all ports to profile drop-down menu.
b. Click Force (still need to "Apply").
c. Click Apply.
Tip
Step 9 Return to your originating procedure (NTP).
November 2004
Step 5 for each DS-1 or DS-3 port where you want to change profiles.
If you choose the wrong profile, click Reset to return to the previous profile setting.
NTP-B70 Create, Download, and Assign Alarm Severity Profiles
Cisco ONS 15327 Procedure Guide, R4.0
6-23