Dlp-B259 Refresh Ethernet Pm Counts At A Different Time Interval; Dlp-B258 View Ethernet History Pm Parameters - Cisco ONS 15327 Procedure Manual

NTP-B198 Monitor Ethernet Performance

DLP-B259 Refresh Ethernet PM Counts at a Different Time Interval

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click an E-Series or G-Series Ethernet card. The card view appears.
Step 1
Step 2 Click the Performance tab.
Click the Utilization tab or the History tab.
Step 3
Click the Interval drop-down menu button.
Step 4
Choose one of four options:
Step 5
•
•
•
•
Step 6 Click the Refresh button. The PM counts refresh with values based on the chosen time interval.
Step 7 Return to your originating procedure (NTP).

DLP-B258 View Ethernet History PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click an E-Series or G-Series Ethernet card. The card view appears.
Step 1
Step 2 Click the Performance tab.
Step 3 Click the History subtab
Cisco ONS 15327 Procedure Guide, R4.0
7-18
1 min: This option displays the specified PM counts in one-minute time intervals.
15 min: This option displays the specified PM counts in fifteen-minute time intervals.
1 hour: This option displays the specified PM counts in one-hour time intervals.
1 day: This option displays the specified PM counts in one-day (24 hours) time intervals.
(Figure
This task changes the window view to display specified PM counts in
time intervals depending on the interval option selected.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
This task enables you to view historical PM counts at selected time
intervals on an E-Series or G-Series Ethernet card and port to detect
possible performance problems.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
7-8).
Chapter 7 Monitor Performance
March 2003